LCE HR3 Series | AMADA ORII (THAILAND) official corporate site

For the LCE JR3 series, simple button operations can make coil material threading and material loop formation automatic. This is a state-of-the-art straightener feeder that achieves both improvements in work setups and a high level of economic performance. A wide range of specifications can be handled, including material widths of 100 to 600mm and sheet thicknesses of 1.0 to 6.0mm. Furthermore, the reduction of setup times has also been thoroughly pursued, through the addition of a double uncoiler type device ton the product lineup as part of a new series. These products will demonstrate their strength at all kinds of processing worksites.

LCE JR3 Seriesの写真

  • Reduction of setup times and improvement of workability and safety

    Materials mounted on the uncoiler are automatically threaded up to the straightener exit side until a loop shape is formed, and this leads to shorter setup times. Furthermore, in order to carry out the smooth threading of materials, an auxiliary coil press for preventing coil bulges has been installed as a standard part of the equipment. Also, the pressing of coil material perimeters at four points prevents looseness at the time of coil insertion.

  • Improved ease of maintenance and economic performance

    A mechanical system with the lower coil press has been newly developed and there has a switch from oil pressure to air with regard to the operation actuator. Thus, ease of maintenance and economic performance have been improved.

  • Adoption of PLC control

    As a result of the PLC control system, it is possible to flexibly respond to the specifications of customers.

Stock Width (mm)
Model 04HR3E 04HR3V 05HR3E 05HR3V 06HR3E 06HR3V
Stock Thickness
(mm)
0.6~1.6 400 400 500 500 600 600
2.0
2.3
2.5
2.8
3.2
4.0 450 450 450 450
4.5 360 360 360 360 360 360
5.0 290 290 290 290 290 290
6.0 200 200 200 200 200 200

※The above figures are for the material having yield strength of 245N/mm2 max (tensile strength of 392N/ mm2).2

E-Catalog DownLoad

  • Maximizes downsizing
    Stock width: 50 mm to 300 mm Maximum stock thickness: 3.2 mm
  • Best-selling compact, high-performance straightener/feeder
    Maximum stock width: 300 mm, 400 mm Maximum stock thickness: 3.2 mm
  • Includes the first ASC mechanism in the industry for enhanced performance
    Maximum stock width: 300 mm, 400 mm Maximum stock thickness: 3.2 mm
  • A product line with enhanced economic efficiency
    Maximum stock width: 400 mm to 600 mm Maximum stock thickness: 3.2 mm
  • The JF series' high-performance model
    Maximum stock width: 400 mm to 1,000 mm Maximum stock thickness: 4.5 mm
  • 11 work rolls to enable high-accuracy straightening
    Maximum stock width: 500 mm to 1,000 mm Maximum stock thickness: 3.2 mm
  • 11 work rolls to enable high-accuracy straightening
    Maximum stock width: 500 mm to 1,000 mm Maximum stock thickness: 4.5 mm
  • The best match for small, thick stock
    Stock width: 70 mm to 250 mm Maximum stock thickness: 6.0 mm