SH-8Ⅱ | AMADA ORII (THAILAND) official corporate site

The SH-8A, our multifunctional coiling machine with 1-point coiling, torsion attachment, and an initial tension servo, has been fully revamped for greater operability and high-speed production.

SH-8Aの写真

  • 1-point coiling machine with a wire diameter of 0.1 to 0.8 mm

    -Maximum outer coil diameter of 20 mm

    -Equipped with 7 standard axes: feed, cut, pitch, point, torsion, initial tension, and MSD.

    -Optional core forward/reverse servo unit provided.

    -Easier setup and greater speed than previous models, as the cut axis and torsion axis are separated.
    -Suitable for high-speed production of torsion springs and elliptical springs in addition to standard cylindrical springs.

  • Dedicated MNO2 Program for Spring Production

    -Easy operations for quicker preparation.

    -High resolution for controlling the latest servo motors.

    -Compatible with compression spring creation programs based on line graphs.

    -Allows varied control based on measurement results, such as the pitch and diameter.

    -Common program for both torsion machines and coiling machines.

    -Includes a motor sensor system.

    -Versatile production management screen and production data collection function.

  • Taper synchronization constant

    Enables the taper tilt to be managed with a value from 0 to 100.
    Suitable for load adjustment in addition to shape adjustment, as fine adjustment can be performed in 100 levels.

  • Optional Equipment

    -Core forward/reverse servo unit

    -Slip sensor to detect slips in wire feeding

    -Capacitance level sensor

    IS-1 shape detection unit with camera

E-Catalog DownLoad