LCC HL Series | AMADA ORII (THAILAND) official corporate site

This series handles material from 600mm to 1,300mm wide and up to 6.0mm thick.

The 11 work rolls enable an extraordinary level of flatness for materials.

LCC HL Seriesの写真

  • High Degree of Flatness

    Combining the power of the heavy duty HL unit with the straightening performance of 11 work rolls (6 upper and 5 lower), the HL unit gives material a high degree of flatness to materials up to 6.0mm thick.

  • Easy Access to Work Rolls

    The work rolls on the HL can be opened to a maximum of 20 degree, making roll cleaning much easier. The machine was designed to allow easy access to the inside structure for improved maintenance.

  • Work Rolls Drive System

    ■Side Gear System

    The feed roll is equipped with gears that drive each roll, making the lower work rolls run.

    ■All Rolls Driven with Universal Joint System

    This system makes all rolls through universal joints which connect each roll by a motor-driven parallel gear box. This system is especially recommended for both high tension materials and easy-to-slip materials.

  • TP-CCS Controller

    A wide variety of information needed for planning, operation, maintenance, etc., is uniformly controlled under the base mode of “Settings, Planning, Operation, and Maintenance”. Equipped with various new operations, it is a complete operation system that responds to diversification and sophistication of merchandise and reduction of work time.

    more

  • High torque / high rigidity

    All rolls drive system (HLU model) * and frame rigidity improvement (four times higher than the conventional equipment) have enabled straightening of high-tensile steel plate.

    * Refer to the work roll drive system

Straightening Performance Stock Width (mm)
Model 06HLS 08HLS 10HLS 13HLS 06HLU 08HLU 10HLU 13HLU
Stock Thickness
(mm)		 0.8～2.3 600 800 1,000 1,300 600 800 1,000 1,300
2.8 933 933 941 941
3.2 714 714 714 720 720 720
4.0 457 457 457 457 461 461 461 461
4.5 361 361 361 361 364 364 364 364
5.0 293 293 293 293 295 295 295 295
6.0 203 203 203 203 205 205 205 205

※The above figures are for the material having yield strength of 245N/mm2 max (tensile strength of 392N/ mm2).


Straightening Performance
(For High tention materials)		 Stock Width (mm)
Model 06HLS 08HLS 10HLS 13HLS 06HLU 08HLU 10HLU 13HLU
Stock Thickness
(mm)		 2.3 255 252 250 246 558 558 558 558
2.5 232 230 228 225 472 472 472 472
2.8 205 203 202 199 376 376 376 376
3.2 177 175 174 171 288 288 288 288
4.0 138 136 135 133 184 184 184 184
4.5 120 119 118 116 146 146 146 146
5.0 106 105 104 103 118 118 118 118
6.0 81 81 81 81 82 82 82 82

●The above figures are for the material having yield strength of 600N/mm2 max.
※ Specifications are subject to change for improvement without notice.

E-Catalog DownLoad
All E-Catalog_Mobile

  • Maximizes downsizing
    Stock width: 50 mm to 300 mm Maximum stock thickness: 3.2 mm

  • Best-selling compact, high-performance straightener/feeder
    Maximum stock width: 300 mm, 400 mm Maximum stock thickness: 3.2 mm

  • Includes the first ASC mechanism in the industry for enhanced performance
    Maximum stock width: 300 mm, 400 mm Maximum stock thickness: 3.2 mm

  • A product line with enhanced economic efficiency
    Maximum stock width: 400 mm to 600 mm Maximum stock thickness: 3.2 mm

  • The JF series' high-performance model
    Maximum stock width: 400 mm to 1,000 mm Maximum stock thickness: 4.5 mm

  • 11 work rolls to enable high-accuracy straightening
    Maximum stock width: 500 mm to 1,000 mm Maximum stock thickness: 3.2 mm

  • 11 work rolls to enable high-accuracy straightening
    Maximum stock width: 500 mm to 1,000 mm Maximum stock thickness: 4.5 mm

  • The best match for small, thick stock
    Stock width: 70 mm to 250 mm Maximum stock thickness: 6.0 mm

Contact Form