- 1. 8-axis control with an emphasis on operability and quality improvement due to adopt dual feed roller
-The WH-16A supports various shapes with standard features of 8-axis feed control, cut, wedge-pitch, push-pitch, 1st and 2nd points, center-slide and arbor front/back.
-The rotary or straight cuts, and wedge-pitch can be switched by simply moving the eccentric pin.
-You can switch programming between right- and left-hand coiling without replacing the heavy slide.
-The WH-16A is equipped with cut, wedge-pitch, and arbor functions on the center slide. As a result, it only needs to adjust the alignment of the cut tool once regardless of the coil diameter.
-With adopting a dual feed roller, the load of feed pressure applied to the wire is reduced.
- 2. Improved operability with the MNO2 (MEC New Operation 2) programming software
-The MEC original spring program MNO2 easily organizes important statistics about the machine, including program flow, operating status of each axis, inputs/outputs, jump, etc., as with our other spring machines.
-The program editing function has greatly evolved, and the navigation system function and touch screen make it easier to create programs and shorten the setup time.
-The program for number of coils allows change of the feed, pitch, outer coil diameter, initial tension and wedge on the evolved pitch diagram screen, making it easier to adjust the basic coils.
-The automatic function of coil length correction is based on the capacitance length measurement method. The multi-functional production management system gives easy-to-control production.
- 3. Taper Synchronization Constant
Enables the taper tilt to be managed with a value from 0 to 100. Suitable for load adjustment in addition to shape adjustment, as fine adjustment can be performed in 100 levels.
- 4. Optional equipment
Initial-tension or rotation-point servo motor axes are available for 1st and 2nd point axes as an option.
- 5. Support for IOT
The operating status of machine can be monitored through mobile phones or computers, and regular maintenance with preventive maintenance functions can contribute to improved production efficiency.
|Wire diameter||ø0.5 ~ ø1.6 mm|
|Outer coil diameter||ø50 mm|
|Index||D/d 4 or more|
|Feed axis*||0.0001 mm|
|Max feed speed||161 m/min|
|Wedge-pitch axis*||0.0001 mm|
|Push-pitch axis*||0.0001 mm|
|Point axis* x2||0.0001 mm|
|Center-slide axis*||0.0001 mm|
|Arbor front/back*||0.0001 mm|
|Solenoid valves||4 pcs (Max 8 pcs)|
|Max air pressure||0.5 MPa|
|Power source||3-phase, AC 200V, 15A|
|Net weight||820 kg|
|Display||15.6” Full HD touch screen|
|External memory||USB Thumb drive|
|Temperature||5 ~ 40°C|
*Resolution: Program input unit, which does not represent accuracy.
These specifications, machinery, equipment, and appearance are subject to change without notice for reason of improvement.